Which is safer mapp or aceytlene torch for jewelry?

Harmon Lehner asked a question: Which is safer mapp or aceytlene torch for jewelry?
Asked By: Harmon Lehner
Date created: Fri, Jun 11, 2021 9:58 PM

Content

FAQ

Those who are looking for an answer to the question «Which is safer mapp or aceytlene torch for jewelry?» often ask the following questions:

👉 Can mapp gas be used for jewelry?

I have used a MAPP gas torch which I purchased from Sears Roebuck in 1998 both in a jewelry store and at home ( after the store went bankrupt). We used a Smith little torch for gold and the MaAPP gas for silver.and this was perfectly satisfactory. The Sears torch screwed into a portable MAPP gas cylinder.Sears stopped handling the

👉 Is mapp gas used to solder jewelry?

  • The Little Torch can be used with several fuels including acetylene, hydrogen, propane, proplyene, MAPP, or natural gas. The Smith Little Torch Kit 23-1014 - for use with disposable propane or MAPP and oxygen tanks. It works for most jewelry soldering applications or when portability is needed.

👉 Is mapp gas used to solder jewelry machine?

MAPP® gas is a combination of liquefied petroleum gas and methylacetylene-propadiene. It is a non-toxic, easily detectable, stable, high-energy fuel whose 5301°F flame is used in lampworking, brazing, soldering, annealing, flame cutting, and flame-hardening.

10 other answers

ACETYLENE/AIR TORCH. This is a super common torch used for jewelry making that consists of a single tank (acetylene b tank) filled with acetylene gas that mixes with air at the torch head. PROS: Tanks can be easily obtained at plumbing supply stores. You can purchase a variety of torch tips, which allow you to solder small pieces and large pieces. CONS:

For the reasons stated I think acetylene is the safer gas. Propane pools, acetylene does not. It is also a fine gas for making jewelry. I used an air/acetylene torch for years, before switching to propane/ O2. I fabricate mixed metal jewelry. My a/a torch was a work horse for me. I passed that torch on to a novice is a small condo as

Acetylene, natural gas, propane, and butane are used with these torches. This set up is the most complicated to use, the most hazardous, most costly, but also affords you the most adjustability as far as flame size and heat. Brands of this torch type are the Hoke torch, Meco midget, and the Smith mini torch.

tends to fall over in use. Tom. jbin1. September 8, 2016, 6:26am #8. it is hotter than acetylene and oxidizes less than propane, is onlyexpensive in cannisters, not at the welding supply companies. MAPPis a proprietary patented gas. Acetylene is the hottest available fuel gas, you cannot find.

No, because acetylene is still the hottest gas and is able to be focused to a much tinier point than any LP gas. So for jewelry work using a micro torch, you can work faster and cleaner. A lot of...

Portable Bench Torch. The Portable Bench Torch (PBT) includes the pen torch, the hoses needed to connect it to the fuel and oxygen, the valve assembly with built-in check valves, two needle tips for the torch, and a wire torch stand. If you purchase the kit, you get one O2 tank and one self-sealing GP40 gas canister.

I have three sizes of oxy-acetylene torches. A Tescom Little Torch with watch jewels forming the orifices in the tips is perfect for jewelry repair and micro welding. An aircraft size torch for small, not tiny, jobs, and a full size torch for big jobs and cutting. Oxy-acetylene can weld steel and cast iron and also can do brazing.

And, never use a suspect torch or hose or work with suspect connections. Most jewelers use a “B” tank, which is approximately 23 inches tall. Acetylene tanks should be transported from the local welding supply in an upright position –to keep the gas inside stable – and secured so they do not fall over or roll around.

Yes you will need an oxygen tank and regulator as well as an acetylene tank and regulator. The torch will not work with air or with any other gas other than acetylene. When used properly this little torch is awesome and great buy. I highly recommend it for jewelry work and small welding or brazing jobs.

Propane torch reviews: Read reviews from existing buyers; Almost all buyers found that the propane torch comes in very handy and is so much safer than setting precariously on the bench. They also found that the propane torch stand is so helpful plus protects the surface under that base. They strongly agree that the propane torch. Why we like this:

Your Answer

We've handpicked 21 related questions for you, similar to «Which is safer mapp or aceytlene torch for jewelry?» so you can surely find the answer!

How to solder jewelry without a torch?

This one's been riveted all the way around. We have a wonderful class here called "Cold Connections: Jewelry without a Torch" is what we call it. This is another type of rivet. It's an open rivet or a tube rivet. This piece will not come apart, it has been hammered on each side, so it's secure, it's solid, and it's a great way to put jewelry together.

Read more

Does mapp gas melt silver solder?

Sure, but when burning in air MAPP forms a very black sooty flame. Can’t you melt silver solder with a clean propane torch? The flame temperature is ~2200 F, while silver solder melts at maybe 500 F. But, depends on the size of the object how much heat you need.

Read more

Using mapp gas for silver work?

MAPP gas will work just fine with silver I often use MAPP gas as a substitute for propane in my Bernzomatic torch as it burns hotter than propane. My Bernzomatic torch is the type that mixes the fuel with ambient air, so it is not very hot and MAPP gives it an extra boost. I have never tried MAPP gas in my Little Torch as the

Read more

Can i torch aluminum metal for jewelry storage?

The Smith Little Torch is a very well-made torch that we suggest to jewelry makers looking to get the best value for money. For heavy metals like gold and silver you need a soldering torch. As you can see in the chart above you can use any silver solder on copper or brass metal but solder flow points vary between vendors so always check the ...

Read more

Can you solder jewelry with a propane torch?

torch you are using has limitations. Most do. Being that it uses only propane, it won’t generate as much heat as a propane and oxygen torch. If you are only soldering small bits of silver, your torch may be hot enough for you to melt silver solders. However, remembering that silver is a highly heat conducting metal, it will be

Read more

How to make enamel jewelry with a torch?

This video from Rio Grande features Ricky Frank, who discusses how to enamel using a torch. He provides information about what tools and other items are need...

Read more

How to use a micro torch for jewelry?

Filling a Butane Micro Torch Grab your micro torch and butane canister and go outside. (You want to have adequate ventilation when you are filling... If your torch has a stand at the bottom that can be removed, take it off and put it aside. Remove the cap from the butane. Turn the torch upside down…

Read more

How to use a soldering torch for jewelry?

Using a Soldering Torch When Making Metal Jewelry Use a Flame Torch, Not a Soldering Iron. Why can't you use a soldering gun, soldering iron, or cold-heat soldering... Fuel and Torch Tips. The type of fuel you use is also an important element to consider when you select the proper type... Torch ...

Read more

What is the best torch for jewelry making?

The Smith Little Torch is a very well-made torch that we suggest to jewelry makers looking to get the best value for money. For approximately $140, you get versatility and quality that matches those of even more expensive jeweler’s torches. The Smith Little Torch is rugged, it’s very easy to set up, and using it is a pleasure.

Read more

Can i silver solder with mapp gas?

Correspondingly, can you solder with MAPP gas? Use MAPP gas to speed up the job MAPP gas torches burn hotter than propane, making them a better choice for modern solder. Five to 10 seconds of heating with a MAPP gas torch is all that's required before you can feed solder into most 1/2- to 3/4-in. pipes and fittings. Be careful, though. Additionally, what type of flux is used for silver solder?

Read more

Can a butane torch be used for jewelry making?

  • To give those that are new to jewelry making some insights into the different torch types. Here are some pros and cons for working with butane torches from Sara Meska-Flatten owner and designer of Dashota Jewelry: They are great for beginners on a budget. They are very portable and can be stored most anywhere so long as it’s safe.

Read more

Can you use a cooking torch for jewelry making?

Using a Butane Torch For Making Your Own Jewellery At Home. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback doesn't begin shortly, try restarting your device. Up next in 5.

Read more

How to use a butane torch for jewelry making?

Insert the tip of the butane canister and press down firmly. The butane will flow from the canister into the torch. If you hear fuel escaping from the torch head during filling, stop and tighten the knob that regulates the butane flow. I fill the torch until the butane makes a slight spitting noise at the filling point (about a 10 count).

Read more

How to use jewelry butane gas micro hand torch?

jewelers torch smith jewelers torch

Grab your micro torch and butane canister and go outside. (You want to have adequate ventilation when you are filling the torch.) If your torch has a stand at the bottom that can be removed, take it off and put it aside. Remove the cap from the butane.

Read more

What is the best beginner torch for jewelry making?

If you have stumbled upon this article while searching for the best torch to purchase for jewelry making, welcome! There are so many options out there that I …

Read more

What type of torch is used for jewelry metals?

ACETYLENE/AIR TORCH. This is a super common torch used for jewelry making that consists of a single tank (acetylene b tank) filled with acetylene gas that mixes with air at the torch head. Tanks can be easily obtained at plumbing supply stores.

Read more

How to clean up edges of torch fired enameled jewelry?

using copper cleaner after sanding and then rinsing in clean water and drying before firing but still some of the pieces just would not allow the enamel to adhere, or some of it chipped off from the edges

Read more

Is it safe to use a soldering torch on jewelry?

  • As previously mentioned, soldering jewelry is easy to learn, but since you’re dealing with hot metal and a high-heat soldering torch, you’ll need to take a few safety precautions before you get started. Here are a few basic guidelines: Always work in a bright, well-ventilated area.

Read more

Can i use mapp gas for 15% silver brazing?

Can I use MAPP gas for 15% silver brazing? If so, is there a recommendation on the model I will need for brazing a 1/4" - 2" copper tubing. If figure that I'll rarely ever encounter tubing larger than that. It will be used for probably about 15 new installs per year. Do you have a recommendation on a MAPP gas outfit for these circumstances or ...

Read more

How to clean up edges of torch fired enamel jewelry cleaner?

Next step is to wet pack your enamels in to the clean recess in your piece. Just prep the enamel as you usually would for kiln firing (wash it, add klyr-fire etc). I wet pack my enamels on a piece of teflon, on a kiln shelf with “legs”. I will often overfill and sometimes enamel even goes over the dams.

Read more

How to clean up edges of torch fired enamel jewelry kit?

Torch Fired Enamel Tips We recently (in 2016) added Thompson Enamels to our product line, and have had a great time learning to use them. This blog covers a few things we’ve learned along the way! Color These 80-mesh medium-temperature vitreous enamels can be kiln fired or torch fired at temperatures from 1,400 -1,500 F (760 -815 C), and are perfect for use on copper, gold, low-carbon steel ...

Read more